Samsung HT-E550 Listening to Radio, Using Buttons on the Remote Control, Setting Mono/Stereo

	Encoding - which changes by language
	or by geographical area - modifies
Encoding	how the product sorts, arranges, and
	presents files or tracks, displays dates,
	etc. Select Encoding to change the
	encoding to match your language or
	geographical area.
Information	Displays media file and content
	information.

NOTE

Depending on the disc or storage device, the Tools menu may differ. All options may not be displayed.

Listening to Radio

Using Buttons on the Remote Control

1 . Press the FUNCTION button to select FM.

2 . Tune in to the desired station.

•Preset Tuning 1 : Press the 5 button to select PRESET and then press the TUNING/CH (,.) button to select the preset station.

-Before you can tune to preset stations, you must add preset stations to the product's memory.

•Manual Tuning : Press the 5 button to select MANUAL and then press the TUNING/CH (,.) button to tune in to a lower or higher frequency.

•Automatic Tuning : Press the 5 button to select MANUAL and then press and hold the TUNING/CH (,.) button to automatically search the band.

Setting Mono/Stereo

Press the MO/ST button.

•Each time the button is pressed, the sound switches between STEREO and MONO.

•In a poor reception area, select MONO for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory.

1 . Press the FUNCTION button to select FM. 2 . Press the TUNING/CH (,.) button to

select <89.10>.

3 . Press the TUNER MEMORY button.

• NUMBER flashes on the display.

4 . Press the TUNER MEMORY button again.

•Press the TUNER MEMORY button before NUMBER disappears from the display on its own.

•After you press the TUNER MEMORY button, NUMBER disappears from the display and the station is stored in memory.

5 . To preset another station, repeat steps 2 to 4.

•To tune in to a preset station, press the TUNING/CH (,.) button.

Using the Special Effects Remote

Control Buttons

SOUND EFFECT Function	SOUND
	EFFECT

Lets you select a mode that optimizes the sound.

1.Press the SOUND EFFECT button.

2.Press the ▲▼ button to select the desired mode: DSP, Dolby Pro Logic II or SFE Mode.

3.Press the ◄► buttons to select the desired sound effect.

❑DSP

MP3 Enhancer  Power Bass  Virtual 7.1 Off

•MP3 Enhancer : Helps enhance your sound experience (ex. mp3 music). You can upscale your MP3 level sound (24 kHz, 8bit) to CD level sound (44.1 kHz, 16bit).

•Power Bass : Increases the volume level of bass tones and provides thudding sound effects.

•Virtual 7.1 : Applies the 7.1 CH sound effect using the 5.1 CH speaker system.

•Off : Select this for normal listening.

English 47

05 Media Play

HT-E5500W_ZA_0417-1(D2D).indd 47 2012-04-17 오후 7:00:09