Connections
NOTE
If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field.
Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound from the speakers may be disrupted because of interference.
If you use a device such as a microwave oven, wireless LAN Card, or any other device that uses the 2.4/5.8GHz frequencies near the product, sound from the speakers may be disrupted because of interference.
The maximum transmission distance from the product to the wireless receiver module is about 33 feet (10m), but may vary depending on your operating environment. If a
If the product doesn't make a wireless connection, you need to run an ID Set between the product and wireless receiver module. With the product turned off, press "0""1""3""5" on the remote control. Turn on the wireless receiver module. Then, press and hold the “ID SET” button on the back of the wireless receiver module for 5 seconds, and then turn the product on.
Connecting the FM Antenna
FM Antenna (supplied)
AUX |
| VIDEO |
IN |
| |
OUT | ||
|
|
|
| OPTICAL |
|
HDMI OUT | 1 | HDMI IN | 2 | DIGITAL | FM ANT |
AUDIO IN |
1 . Connect the FM antenna supplied to the FM ANTENNA Jack.
2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
NOTE
This product does not receive AM broadcasts.
Connecting to an iPod/iPhone
Using a USB Cable
Connect an iPod/iPhone using the USB cable to the front USB port.
Using a Dock
To view a video from your iPod on your TV, you must also connect the Video Out jack on the product to the Video In jack on your TV. See page 19.
SPEAKERS OUT
iPod
5V 500mA
iPod
|
|
| AUX | VIDEO |
|
|
|
| IN | OUT |
|
|
|
|
| OPTICAL |
|
LAN | WIRELESS | HDMI OUT | HDMI IN | DIGITAL | FM ANT |
|
| AUDIO IN |
NOTE
Make sure to connect the dock connector so that the label “” faces upward.
18 English
