Using the Switch from a Remote Console
3.Click “Add Predefined”. A list of sequences will appear.
4.Select the desired sequence and click “OK”. The sequence will appear in the
5.Click “OK”. The sequence will now appear in the
To record a keyboard sequence:
1.In the 
2.Click “Add/Remove”. The
3.Click “Record New”. The
4.Assign a name to the key sequence in the Label box.
5.Click “Start Recording”.
6.Press the desired keys. The keys will appear in the box.
7.Click “Stop Recording”.
8.Click “OK” to complete and save the sequence.
Fig. 17 Add-Special-Key Box
1
2
3
4
5 | section |
|
6
7
8
9
10
51