SMB CAT5 KVM Switch | Belkin F1DP108A specification

® SMB CAT5 KVM Switch

7.Click on “File”, select “Open”, and navigate to the saved location of the ﬁ rmware; next, select the ﬁ rmware ﬁ le, and then click “Open”. You should see the selected upgrade ﬁ le name appear on the bottom left of the SMB update window.

Note: When performing the ﬂ ash-upgrade, be sure to select the correct ﬁ rmware ﬁ le for the component that you are upgrading. If you select the wrong ﬁ le, you will see an “Invalid Hex File” notiﬁ cation next to the component you are trying to update. It is recommended that you disable security before performing the

ﬁ rmware upgrade, in the event that your OSD settings are reset.

8.Click on the “Start” button.

Note: Ensure that the KVM Switch and all of the attached devices, including the keyboard, monitor, mouse, CAT5 cables, and server interface modules, are properly connected and powered on. It is recommended that you disable security before performing the ﬁ rmware upgrade, in the event that your OSD settings are reset.

9.In the warning window, click on the “OK” button.

10.At the bottom of the “SMB Update” window, a progress bar displays the status of the upgrade.