Belkin F1DP108A manual OmniView SMB CAT5 KVM Switch

OmniView® SMB CAT5 KVM Switch

11.When fl ash-upgrading the SMB Manager, the warning below will appear. Select “No” if you would like to retain your current on-screen display settings; selecting “Yes” will reset the OSD to the factory defaults.

12.After the fl ash-upgrade process is complete, click on “Options”, and “Advanced”, and then click on “Reset Device”.

13.The fi rmware upgrade process is now complete; uncheck the box next to the component you have upgraded.

14.You can now repeat steps 6 through to 13 on all additional components. If you are upgrading the remote units, you can select multiple dongles with the same connection type, e.g., PS/2, and simultaneously fl ash-upgrade the fi rmware on all PS/2 dongles.

Belkin Tech Support

US: 800-223-5546 ext. 2263 310-898-1100 ext. 2263

Europe: 00 800 223 55 460

Australia: 1800 235 546

New Zealand: 0800 235 546

Singapore: 800 616 1790

Belkin Corporation

501 West Walnut Street

Los Angeles, CA 90220-5221, USA 310-898-1100

310-898-1111 fax

Belkin Ltd.

Express Business Park, Shipton Way Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000

+44 (0) 1933 31 2000 fax

Belkin B.V.

Boeing Avenue 333

1119 PH Schiphol-Rijk, The Netherlands

+31 (0) 20 654 7300

+31 (0) 20 654 7349 fax

Belkin Ltd.

7 Bowen Crescent, West Gosford NSW 2250, Australia

+61 (0) 2 4372 8600

+61 (0) 2 4372 8603 fax

25WEB062

© 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.