Belkin F6D3000 user manual WPA with server Settings

Page 31

Using the Belkin Wireless Network Utility

WPA (with server) Settings

Choose this setting if your network uses a radius server to distribute keys to the clients (network cards). WPA (with server) is typically used in business networks.

1.From the “Security Mode” drop-down menu, select “WPA (with Radius Server)”.

2.Enter the IP address of the radius server into the “Radius Server” fields.

3.Enter the radius key into the “Radius Key” field.

4.Enter the key interval. The key interval is how often the keys are distributed (in packets).

1

2

3

4

5

6

section

5.Click “Apply Changes” to finish.

IMPORTANT: You must now set all wireless network cards/adapters to match these settings.

27

Image 31

Contents Dual-Band Wireless A+G Desktop Network Card Page Table of Contents Page Introduction Advantages of a Wireless NetworkIntroduction Wireless Router or Access Point PlacementAvoid Obstacles and Interference Choose the Quietest Channel for your Wireless NetworkCordless Phones Secure Connections, VPNs, and AOL Introduction Overview Product FeaturesApplications and Advantages Product SpecificationsSystem Requirements Package ContentsInstalling and Setting Up the Card Insert Insert the Card into your computer Installing and Setting Up the CardSection Installing and Setting Up the Card Your setup is now complete How to Access the Belkin Wireless Network Utility Using the Belkin Wireless Network UtilityMonitoring the Status of your Network Connection More… ChannelEncryption Link SpeedFinding Available Networks in your Area Using the Belkin Wireless Network UtilityType SignalNetwork Name SecurityTransfer Rate Setting up Wireless Network ProfilesUsing the Belkin Wireless Network Utility Bit WEP Securing your Wi-Fi NetworkWired Equivalent Privacy WEP Encryption MethodsBit Encryption Wi-Fi Protected Access WPAEncryption Keys Network key= MyPassword Using the Belkin Wireless Network Utility Bit WEP Encryption WEP SetupC3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key WPA-PSK no server WPA with server Settings Connecting to a Wireless Network using 64-Bit or 128-Bit WEP Configuring your Belkin Wireless Card to Use SecurityConnecting to a Wireless Network using WPA-PSK no server Using the Belkin Wireless Network Utility Connecting to a Wireless Network using WPA-Radius Server or Can’t connect to the Internet wirelessly TroubleshootingName of your wireless network appears in Available Networks Troubleshooting Card is not working Data transfer is sometimes slow Troubleshooting Troubleshooting Wireless Comparison Chart Technical Support FCC Statement InformationInformation Belkin Corporation Limited Lifetime Product Warranty Wi-FIInteroperability Certificate 4372