Belkin F6D3000 user manual Name of your wireless network appears in Available Networks

Page 37

Troubleshooting

If you are using a Belkin Dual-Band Wireless A+G Router in 802.11a mode, “Belkin Super A” is the default name.

If you are using a Belkin Dual-Band Wireless A+G Router in 802.11b/g mode, “Belkin Super G” is the default name.

If you are using a Belkin 802.11g (125HSM) Router, or Belkin 802.11g (54g) router, “Belkin54g” is the default name.

If you are using a Belkin 802.11b Router, the default name should be “WLAN”.

If you are using a Belkin Pre-N Router, the default name should be “Belkin pre-N” followed by the serial number specific to that Router.

If you are NOT using a Belkin Router, please consult your router manufacturer’s user manual for the default name.

The name of your wireless network appears in “Available Networks”

If the correct network name is listed in “Available Networks”, please follow the steps below to connect wirelessly:

1.Click on the correct network name in “Available Networks” to connect to the network.

2.If the network has security (encryption) enabled, you will need to enter the network key. For more information regarding security, see the page entitled: “Configuring your Belkin Wireless Card to Use Security” of this User Manual.

3.Within a few seconds, the tray icon in the lower right-hand corner of your screen should turn green, indicating a successful connection to the network.

If you are still unable to access the Internet after connecting to the wireless network, please contact Belkin Technical Support.

1

2

3

4

5

6

section

33

Image 37

Contents Dual-Band Wireless A+G Desktop Network Card Page Table of Contents Page Introduction Advantages of a Wireless NetworkIntroduction Wireless Router or Access Point PlacementAvoid Obstacles and Interference Choose the Quietest Channel for your Wireless NetworkCordless Phones Secure Connections, VPNs, and AOL Introduction Overview Product FeaturesApplications and Advantages Product SpecificationsSystem Requirements Package ContentsInstalling and Setting Up the Card Insert Insert the Card into your computer Installing and Setting Up the CardSection Installing and Setting Up the Card Your setup is now complete How to Access the Belkin Wireless Network Utility Using the Belkin Wireless Network UtilityMonitoring the Status of your Network Connection Encryption ChannelLink Speed More…Finding Available Networks in your Area Using the Belkin Wireless Network UtilityNetwork Name SignalSecurity TypeTransfer Rate Setting up Wireless Network ProfilesUsing the Belkin Wireless Network Utility Wired Equivalent Privacy WEP Securing your Wi-Fi NetworkEncryption Methods Bit WEPBit Encryption Wi-Fi Protected Access WPAEncryption Keys Network key= MyPassword Using the Belkin Wireless Network Utility Bit WEP Encryption WEP SetupC3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key WPA-PSK no server WPA with server Settings Connecting to a Wireless Network using 64-Bit or 128-Bit WEP Configuring your Belkin Wireless Card to Use SecurityConnecting to a Wireless Network using WPA-PSK no server Using the Belkin Wireless Network Utility Connecting to a Wireless Network using WPA-Radius Server or Can’t connect to the Internet wirelessly TroubleshootingName of your wireless network appears in Available Networks Troubleshooting Card is not working Data transfer is sometimes slow Troubleshooting Troubleshooting Wireless Comparison Chart Technical Support FCC Statement InformationInformation Belkin Corporation Limited Lifetime Product Warranty Wi-FIInteroperability Certificate 4372