AT Installation

AT installation requires a PS/2-AT adapter (not included with keyboard).

A.Make sure that the computer is turned off.

B.Connect the PS/2-AT adapter onto the USB-PS/2 adapter.

C.Check to ensure that the USB-PS/2 adapter is firmly connected to the keyboard’s USB plug.

D.Locate the computer AT keyboard port on the back of your computer

E.Plug your keyboard into the AT keyboard port. Check the box in which your keyboard was shipped to verify the ports supported.

F.Turn your computer on. At this point, your keyboard will work with the built-in Microsoft® Operating System. If your keyboard does not respond, please contact the Belkin Technical Support department at (800) 223-5546 ext. 2263.

AT Connector