Installation
Before Installing
Keep the following in mind while installing the monitor.
•The monitor should be visible to the driver only if it is used for navigation, system control or vehicle information. If the monitor will be used for other purposes, it should be installed in such a way that it will only operate while the vehicle is not moving (such as when the parking brake is in use). Review all applicable state and local laws and regulations to make sure the monitor is used properly and safely.
•The installed monitor must not interfere with the driver’s vision.
Installing the LX1200TI monitor consists of three steps:
1.Installing the touchscreen driver software - see page 12
2.Mounting the monitor using the mounting interface built into the monitor’s back cover - see page 16
3.Connecting the monitor to the computer and power source - see page 17
Note: Installing the SoftKey Macro Software - see page 27
LX1200TI User’s Guide | 11 |
