Belkin F6U600AU manual Peripheral Equipment Connection, Modem/Phone line Connection

Page 4

5 - Peripheral Equipment Connection

Plug your peripheral equipment (printer, scanner or speakers) into the full-time surge protection outlet.

This receptacle does not provide any power during a power failure.

Printer

Note: DO NOT plug a laser printer, copier, space heater, vacuum or other large electrical device into the UPS. The power demands of these devices will overload and possibly damage the unit.

6 - Modem/Phone line Connection

Plug incoming phone line into the "IN" socket on the front of the UPS. Connect another phone line cable into the "OUT" socket on the front of the UPS. Plug the other end into the modem input socket as shown.

Incoming phone line

Modem

4

Image 4
Contents Quick Install Guide Introduction PlacementInspection Charging Computer ConnectionPeripheral Equipment Connection Modem/Phone line ConnectionTurn On/Off DC Start FunctionInstalling Belkin Automatic Power Management Software Step PC Installation Mac InstallationStep Important Safety Instructions Specification Front System DescriptionBack Troubleshooting SymptomPossible Cause Remedy