FORMAT THE USB 2.0 EXTERNAL DRIVE
IMPORTANT
Be sure that you select option 5 and change the “Current Fixed Disk” from “Disk 1” to the disk number assigned to your External Drive. If your computer is equipped with only one internal drive, your new External Drive will be identified as “Disk 2”. If your computer is equipped with two internal disk drives, your new External Drive will be identified as “Disk 3”. Failure to follow this step will result in the loss of all data on your primary internal hard disk.
6.In the steps that follow, you must specify if you want to create one partition equal to the maximum capacity of your external disk drive, or if you want to create multiple partitions.
7.After completing the disk partition procedure, exit FDISK and restart Windows. Any new drives created through the disk partition procedure must now be formatted using the Windows disk format utility.
Partition under Windows 2000/XP
1.To partition the USB 2.0 hard disk drive under Windows 2000, please plug in the USB 2.0 External Drive, then click on “Start”, choose “Settings”, then choose “Control Panel”.
Note: In Widows XP, click on “Start”, choose “Control Panel”, click on the “Performance & Maintenance” icon, click on the “Administrative Tools” icon, then click on the “Computer Management” icon.
14