Self Help Guide
You will now need to restore the unit to Factory Defaults
Step 1 Open Internet Explorer and type in the Address Bar http://10.1.1.1
(You will be presented with the following screen)
Step 2 In the password field type in admin and click LOGIN Step 3 Click Advanced Setup
Step 4 Click Tools then Configuration Tools
(You will be presented with the following screen)
Step 5 Place the Dot next to Restore Router to Factory Defaults and click Next Step 6 Click APPLY
(You will be presented with the following screen)
| If you still require further assistance | Call: | 1300 554 780 |
Page 3 of 4 | contact Belkin Technical Support | Visit: | www.belkin.com/au/support |
GD2417