Belkin Range Extender/ Access Point manual Using the Wireless Mode Switch

Page 22

Using the Web-Based Advanced User Interface

Using the Wireless Mode Switch

Your WURE can operate in three different wireless modes: “54g- Auto”, “54g-Only”, and “54g-LRS”. The different modes are explained next.

54g-Auto Mode

In this mode, the WURE is compatible with 802.11b and 802.11g wireless clients simultaneously. This mode is the factory default and ensures full compatibility with Wi-Fi-compatible devices. Set the WURE to 54g-Auto mode if you have a mix of 802.11b and 802.11g clients in your network. This is the recommended setting for your WURE and should only be changed if you have a specific reason to do so.

54g-Only Mode

54g-Only mode is compatible with 802.11g clients only. Use this mode only if you do not have any 802.11b clients that need access to the network. To switch modes, select the desired mode from the drop-down box next to “Wireless Mode” then click “Apply Changes”.

54g-LRS Mode

It is not recommended you use this mode unless you have a very specific reason to do so. This mode exists only to solve unique problems that may occur with some 802.11b client adapters and is NOT necessary for interoperability of 802.11g and 802.11b standards.

When to Use 54g-LRS Mode

In some cases, older 802.11b clients may not be compatible with 802.11g wireless. These adapters tend to be of lesser design or use older drivers or technology. 54g-LRS (Limited Rate Support) allows these clients to be compatible with the newer 802.11g technology. Switching to this mode can solve problems that sometimes occur with these clients. If you suspect that you are using a client adapter that falls into this category of adapters, first check with the adapter vendor to see if there is a driver update. If there is no driver update available, switching to 54g-LRS mode may fix your problem.

Please note that switching to 54g-LRS mode may decrease 802.11g performance.

Changing the Wireless Channel

There are a number of operating channels you can choose from. In the United States, there are 11 channels. In the United Kingdom and most of Europe, there are 13 channels. In a small number of other countries, there are other channel requirements. Your WURE is configured to operate on the proper channels for the country you

1

2

3

4

5

6

7

section

19

Image 22

Contents Range Extender Access Point Increase your wireless coverage Table of Contents Advantages of a Wireless Network IntroductionWireless Router or Access Point Placement IntroductionChoose the quietest channel for your wireless network Cordless Phone PlacementAvoid Obstacles and Interference Secure Connections, VPNs, and AOL Overview Power LEDWireless LED Front PanelOverview Specifications Package ContentsSystem Requirements Configuring as a Wireless Access Point Connect Configuring the WureConnecting as a Wireless Access Point Running the Easy Install Wizard Software InstallConfigure Running the Wireless Range Extender Management UtilityConfiguring the Wure Advanced Configuration Connecting the Wure Configuring with One-Touch SetupRepositioning the Wure in a Weak Signal Area or Dead Spot RepositionUsing the Web-Based Advanced User Interface Windows 98SE, Me, 2000, and XPUsing the Web-Based Advanced User Interface Logging into the WureUnderstanding the Web-Based Advanced User Interface Using the Web-Based Advanced User InterfaceLogging out of the Wure Quick Navigation LinksFeatures Login/Logout ButtonLAN Settings Home ButtonWireless Basic Changing the Wireless Network Name SsidUsing the Wireless Mode Switch Using the Broadcast Ssid Feature Protected Mode Repeater Mode Status of your connection will show in the Status box Securing your Wi-FiNetwork NameBit WEP WEP Wired Equivalent PrivacyEncryption Keys WPA Wi-Fi Protected Access Sharing the Same Network KeysUsing a Hexadecimal Key Bit WEP Encryption WEP SetupFor instance AF 0F 4B C3 D4 = 64-bit WEP key C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key Changing the Wireless Security Settings WPA SetupSetting WPA-Personal PSK Using the Web-Based Advanced User Interface Setting WPA2-Personal AES To Enable a Deny List Setting MAC Address FilteringTo Enable an Allow List MAC Address ControlSetting or Changing the Administrator Password Changing System SettingsRestoring Factory Default Settings Saving a Current Configuration Changing System Settings Configuration is now savedRestoring a Previous Configuration Updating Firmware Checking for a New Version of FirmwareDownloading a New Version of Firmware Updating the WURE’s Firmware Changing System Settings Problem TroubleshootingSolution Section Troubleshooting How do I extend the range of my wireless network? Troubleshooting Click OK, and then Apply to save the settings Troubleshooting Supported Operating Systems Enabling WPA-PSK no serverTroubleshooting Wireless Comparison Chart Technical SupportInformation Federal Communications Commission NoticeCanada-Industry Canada IC ModificationsEurope-European Union Notice Belkin Corporation Limited Lifetime Product Warranty Information