Using the Web-Based Advanced User Interface
to “Broadcast SSID”, and then click “Apply Changes”. The change is immediate. Each computer now must be set to connect to your specific SSID; an SSID of “ANY” will no longer be accepted. Refer to the documentation of your wireless network adapter for information on making this change.
Protected Mode
As part of the 802.11g specification, Protected mode will ensure proper operation of 802.11g clients and access points when there is heavy 802.11b traffic in the operating environment. When Protected mode is ON, 802.11g will scan for other wireless network traffic before it transmits data. This method of “waiting” helps when there is very heavy traffic, but adds unnecessary delays when there is no heavy traffic.
If you are in an environment where there is no other (or very little) wireless network traffic, best performance is achieved with Protected mode OFF. If you are operating in an environment with HEAVY 802.11b traffic or interference, best performance may be achieved with Protected mode ON.
1
2
3
4
5
6
7
section
21