Alternate Setup Method
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
1.PPTP Account
Provided by your ISP.. Enter your PPTP account name here..
2.PPTP Password
Type in your password and retype it into the “Retype Password” box to confirm it..
3.Host Name
Provided by your ISP.. Enter your host name here..
The following becomes visible when you deselect “Get IP by DHCP”..
4.Service IP Address
Provided by your ISP.. Enter your service IP address here..
5.My IP Address
Provided by your ISP.. Enter the IP address here..
6.My Subnet Mask
Provided by your ISP.. Enter the IP address here..
7.Default Gateway
Provided by your ISP.. If your ISP did not give you a connection ID (default gateway), leave this blank..
8.Disconnect after X…
The “Disconnect” feature is used to automatically disconnect the Router from your ISP when there is no activity for a specified period of time.. For instance, placing a check mark next to this option and entering “5” into the minute field will cause the Router to disconnect from the Internet after five minutes of no Internet activity.. This option should be used if you pay for your Internet service by the minute..
Double N+ Wireless Router | 31 |