Using the Web-Based Advanced User Interface
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Changing the Wireless Security Settings
Your Double N+ Wireless Router is equipped with the latest security standard called
Using Wi-Fi Protected Setup
WPS recommends that you set up WPA2 (described on page 44) as your wireless security.. WPS does not provide additional security, but rather simplifies the addition of wireless devices to your wireless network..
You may use either the Push Button Configuration (PBC) method or PIN method to allow a device access to your wireless network:
PBC: Push and hold the WPS button located on the front of your Router for two seconds and the security LED will flash, indicating that WPS has been initiated.. Then, initiate WPS on the client device within two minutes (refer to your client’s documentation on this procedure).. The wireless device and Router will automatically exchange a security key and establish a secure connection..
PIN: The client device has a WPS PIN number (eight digits) that will be provided to you when you initiate the connection to the Router.. Enable WPS through the screen illustrated to the right.. Enter the client’s PIN into the Router’s internal registrar (accessed through this screen).. The client will be securely enrolled into your wireless network within two minutes..
Double N+ Wireless Router | 42 |