Belkin N600 manual Getting to Know Your Router Front Panel, Router Status Light, Off Idle

Getting to Know Your Router

Front Panel

(a)

(b)

A) Router Status Light

Your Router’s status is shown by the light on the front.. Off: The Router is not plugged into a power source.. Blinking Green: The Router is starting up..

Solid Green: The Router is connected to the Internet..

Blinking Amber: Either the ADSL (RJ11) cable is not plugged in, or there is no signal..

B) Wi-Fi Protected Setup (WPS) Light and Button

The WPS button on the front of your Router can be used to help establish a secure connection between your Router and other WPS-enabled Wi-Fi devices such as computers.. To use the WPS feature on your Router, see “Getting Started > Adding Computers to Your Network > Using the WPS Button”..

The small light near the WPS button shows what is happening while you are using WPS to establish a connection..

Off: Idle

Blinking Green: The Router is listening for a WPS-enabled computer or other device..

Solid Green: The Router has made a secure connection with the computer or other device..

Amber: A connection was not created..

19