Installation
Connecting the display
Use only the power adapter, power cord, and the video cables shipped with this display.
To setup this display, please refer to the following figure and procedures.
1.Be sure all equipment is turned off.
2.Connect the DC power cord to the power connector; plug one end of the AC power cord into the power adapter, and the other end into an electrical outlet. ( 
).
3.For a PC with DisplayPort output, connect the DisplayPort
signal cable from the display DisplayPort input connector to the DisplayPort connector of your host computer. ( 
).
4.For a PC with DVI digital output, connect the DVI signal cable from the display 
).
5.Turn on your computer, display and video source.
19