Barco MDRC-2124 user manual Water and moisture, Ventilation, Installation

Page 9

Equipment not complying with IEC 60601 must be kept outside the patient environment, as defined in the standard as at least 1.5 meters from the patient or the patient support.

Any person who connects external equipment to signal input, signal output, or other connectors has formed a system and is therefore responsible for the system to comply with the requirements of IEC 60601-1-1. If in doubt, speak with a qualified technician.

In locations where 240V outlets are used, connect this display only on a center-tapped, 240V, single-phase supply.

Water and moisture

Never expose the display to rain or moisture.

Never use the display near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry tub or in a wet basement.

Ventilation

Do not cover or block the ventilation openings in the cover of the set. When installing the display in a cupboard or another closed location, heed the necessary space between the set and the sides of the cupboard.

Installation

Place the display on a flat, solid and stable surface that can support the weight of at least 3 displays. If you use an unstable cart or stand, the display may fall, causing serious injury to a child or adult, and serious damage to the equipment.

9

Image 9
Contents MDRC-2124 Page Copyright notice Table of Contents Preface Important noticeTrademarks Disposal Information Environmental informationSafety Instructions General RecommendationsElectrical shock Classification Power cords Power connectionIntended use External equipmentInstallation Water and moistureVentilation Optimize the lifetime of your display Use a screen saver to avoid image retentionUnderstand pixel technology Unpacking and handling tips Enhance user comfortMaximize Quality Assurance Preventing fire and injury Shipping/storing the display Cleaning the displayExplanation of symbols About the product IntroductionPackage overview Front View Display parts, controls and connectionsBack View Connecting the display InstallationPage Vertical height Adjusting the display positionLeft to right pan Remove display from standOn-Screen Display menus How to use the OSD menusInput selection menu OSD menus overviewAdjustments menu White point submenu User submenu Level submenu OSD setting submenu Information menu Appendix TroubleshootingProblem Vague image characters and graphics Problem Image is scrollingNo Signal Out Of RangeProduct dimensions LCD Panel Technical specificationsOptions Compatibility modes Standard ResolutionCanada, European Union, United States Regulatory ComplianceEU Declaration of Conformity for Medical Application Page FCC Compliance Statement PRC Barco MID General Warranty Terms and Conditions Page Page Article 3 Obligations of the Customer Article 5 Disclaimer of Warranties Page Page B410640-02 November