3M UMUV.10-045V2 user manual Power and extension cords, Environment

AP-10AV / DP-10AV / DP-10AV Series User Manual

3. Installation

D.Precautions (Cont.)

Power and extension cords

1.Do not allow anything to rest on the power cord.

2.Do not locate this product where persons will walk on the cord.

3.Use the proper power cord with correct attachment plug type. If the power source is 120V AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country’s safety regulations, such as VDE for Germany.

4.Do not overload wall outlets or power cords. Ensure that the total of all units plugged into the wall outlet does not exceed 10 amperes.

5.Ensure that the total ampere ratings on all units plugged into the extension cord is not above the cord’s rating.

6.If the power supply cord, which came with your monitor, is to be connected to the PC instead of the wall outlet, this equipment is to be used with UL/TÜV approved computers with receptacle rated 100~240V AC, 50/60Hz, 1.0A(minimum).

Environment

1.Place the monitor on a flat and leveled surface.

2.Place the monitor in a well-ventilated place.

3.Keep the monitor away from ： Overly hot, cold or humid places, places directly under sunlight, dusty surroundings, equipment that generate strong magnetic fields.

Apr 05 P.9