3M UMUV.10-045V2 user manual Package Contents, Cleaning

Page 8

AP-10AV / DP-10AV / DP-10AV Series

User Manual

3. Installation

A.Package Contents

After unpacking the carton, check and see if the following items are included in

good condition. Contact your supplier as soon as possible for replacing the

missing / damaged items.

10.4” TFT LCD monitor

RCA Cable (Optional For AV Version only)

S-Video Cable (Optional For AV Version only)

VGA Cable (Male to Male)

DC 12V Adapter (5A)

Power Cord

Mounting Bracket (AP Series only)

User Manual

CD Disc

B.Caution to The User

To assure continued FCC compliance, please use grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded BNC (5) cable. Also,

The Federal Communications Commission warns the user that any unauthorized changes or modifications to the unit if not expressly approved by the party responsible for compliance could void the user's authority of operating the equipment.

C.Cleaning

1.Gently wipe screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth. This removes dust and other particles that can scratch the screen.

2.Do not apply excessive pressure to the screen surface when wiping it clean because this may damage the LCD.

3.Do not pour or spray any liquid directly onto the screen or case of the LCD monitor. Chemical cleaners have been reported to damage the screen or case of the LCD monitor.

Apr 05

P.7

Image 8
Contents AP-10AV Series DP-10AV Series OP-10AV Series Table of Content InstallationUsing the System IntroductionFeatures OverviewDimension Diagrams DP-10AV series OP-10AV series Power Supply ConnectorsDimension WeightPackage Contents CleaningPlugs PrecautionsPower Power and extension cords EnvironmentProduct Views DP Series Front View DP Series Rear View OP Series Front View OP Series Rear View Using the System O OutletInstallation Procedures Setup Touchscreen For Windows 95, 98, Me, NT4.0, 2000 & XPFor DOS Install a C\MTS\TOUCH Loading the DOS Touchscreen Driver OSD Switch OSD Control For VGA Input Vesion LCD Membrane Diagram Phase OSD Control For VGA Input VersionBrightness ContrastMisc Colour OSD Control For Video Input VersionPhase ︰ PicturePosition ︰ Sharpness ︰Auto Adjust ︰ Auto Phase ︰Function Auto Position ︰OSD Menu Miscellaneous Mode Select ︰Reset ︰