IBM 8840 manual Using the baseboard management controller, Bios update and configuration

Page 35

1000BASE-T) and duplex mode (full-duplex or half-duplex) of the network and automatically operate at that rate and mode.

You do not have to set any jumpers or configure the controllers. However, you must install a device driver to enable the operating system to address the controllers. For device drivers and information about configuring the Ethernet controllers, see the Broadcom NetXtreme Gigabit Ethernet Software CD that comes with the server. For updated information about configuring the controllers, go to http://www.ibm.com/support/.

Using the baseboard management controller

The baseboard management controller provides environmental monitoring for the server. If environmental conditions exceed thresholds or if system components fail, the baseboard management controller lights LEDs to help you diagnose the problem and also records the error in the System Event/Error log.

The baseboard management controller also provides the following remote server management capabilities through the OSA SMBridge management utility program:

vCommand-line interface (IPMI Shell)

The command-line interface provides direct access to server management functions through the IPMI 1.5 protocol. Use the command-line interface to issue commands to control the server power, view system information, and identify the server. You can also save one or more commands as a text file and run the file as a script.

vSerial over LAN

Establish a Serial over LAN (SOL) connection to manage servers from a remote location. You can remotely view and change the BIOS settings, restart the server, identify the server, and perform other management functions. Any standard Telenet client application can access the SOL connection.

Enabling and configuring SOL using the OSA SMBridge management utility program

To enable and configure the server for SOL by using the OSA SMBridge management utility program, you must update and configure the BIOS code and enable the operating system for an SOL connection.

Note: In an SOL session, use the following commands instead of function keys:

vTo start the Configuration/Setup Utility program when the prompt Press F1 for Configuration/Setup appears, press Esc, Shift+o, then Shift+p.

vTo start the diagnostic programs, when the prompt F2 for Diagnostics appears, press Esc, Shift+o, then Shift+q.

BIOS update and configuration

Complete the following steps to update and configure the BIOS code to enable

SOL:

1.Update the BIOS code:

a.Download the latest version of the BIOS code from http://www.ibm.com/support/.

b.Update the BIOS code, following the instructions that come with the update file that you downloaded.

2.Configure the BIOS settings:

Chapter 2. Configuring the server 23

Page 34 Page 36
Image 35
Page 34 Page 36
Contents ERserver Page ERserver Page Contents Appendix A. Getting help and technical assistance Safety Vi IBM xSeries 346 Type 8840 User’s Guide Safety Statement Safety IBM xSeries 346 Type 8840 User’s Guide Related documentation Introducing the IBM xSeries 346 TypeIBM xSeries 346 Type 8840 User’s Guide Features and specifications Features and specificationsWhat your server offers Reliability, availability, and serviceability IBM Director UpdateXpress program Front view IBM xSeries 346 Type 8840 User’s Guide ASM Rear viewTurning off the server Server power featuresTurning on the server Introducing the IBM xSeries 346 Type 8840 IBM xSeries 346 Type 8840 User’s Guide Using the Configuration/Setup Utility program Configuring the serverConfiguration/Setup Utility menu choices Starting the Configuration/Setup Utility programMemory Settings Power-on PasswordAdministrator Password Advanced SetupSystem Event/Error Log Baseboard Management Controller SettingsEvent/Error Logs Post Error LogPower-on password PasswordsAdministrator password Using the ServerGuide Setup and Installation CDServerGuide features Typical operating-system installation Setup and configuration overviewConfiguring the controller Installing your operating system without ServerGuideEnabling the Scsi HostRAID feature Select Create new RAID-1 Select Stripe SizeConfiguring the Ethernet controllers Viewing the configurationUsing the Boot Menu program Serial over LAN Using the baseboard management controllerBios update and configuration Command-line interface Ipmi ShellRed Hat Enterprise Linux ES 2.1 configuration Linux configurationAdd the following lines between the two image= sections Original /etc/lilo.conf contents Add the following five lines between the two title= sections Original /boot/grub/grub.conf contents Suse Sles 8.0 configuration Append the following text to the first title line Microsoft Windows 2003 Standard Edition configuration Original bootcfg program output Installing the OSA SMBridge management utility programConfiguring the server CLI command-line interface mode Using the baseboard management controller utility programsUsing the OSA SMBridge management utility program Starting the SCSISelect Utility program Using the SCSISelect Utility programSCSISelect Utility menu choices Before you call Using the documentationAppendix A. Getting help and technical assistance Getting help and information from the World Wide Web Software service and support Hardware service and supportEdition notice Appendix B. NoticesImportant notes TrademarksProduct recycling and disposal Battery return program Avis de conformité à la réglementation d’Industrie Canada Industry Canada Class a emission compliance statementEuropean Union EMC Directive conformance statement IBM xSeries 346 Type 8840 User’s Guide Scsi IndexSerial connector Page Part Number 31R1192
Top Page Image Contents