TRENDnet BRM504 Checking TCP/IP Settings Windows NT4.0, Obtain an IP address from a Dhcp Server

PC Configuration

Checking TCP/IP Settings - Windows NT4.0

1.Select Control Panel - Network, and, on the Protocols tab, select the TCP/IP protocol, as shown below.

Figure 18: Windows NT4.0 - TCP/IP

2.Click the Properties button to see a screen like the one below.

Broadband ADSL Router User Guide

Figure 19: Windows NT4.0 - IP Address

3.Select the network card for your LAN.

4.Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address, as explained below.

Obtain an IP address from a DHCP Server

This is the default Windows setting. Using this is recommended. By default, the Broadband ADSL Router will act as a DHCP Server.

Restart your PC to ensure it obtains an IP Address from the Broadband ADSL Router.

Specify an IP Address

If your PC is already configured, check with your network administrator before making the following changes.

1.The Default Gateway must be set to the IP address of the Broadband ADSL Router. To set this:

•Click the Advanced button on the screen above.

•On the following screen, click the Add button in the Gateways panel, and enter the Broadband ADSL Router's IP address, as shown in Figure 20 below.

•If necessary, use the Up button to make the Broadband ADSL Router the first entry in the Gateways list.

23 24