Star Micronics SP300 Control Codes Used for Page Layout, Control Code Used for Graphics Printing

Control Codes Used for Page Layout

Control codes		Hexadecimal		Function	Page
		codes
<FF>		0C		Page feed (form feed)	37
<ESC> “C”	n	1B	43 n	Set page length at n lines	37
<ESC> “C” <0> n		1B	43 00 n	Set page length at n inches	37
<ESC> “B”	n1 n2	1B	42 n1 n2	Set vertical tab positions	38
<VT>		0B		Execute vertical tab	38
<ESC> “N”	n	1B	4E n	Set bottom margin	38
<ESC> “O”		1B 4F		Cancel bottom margin	39
<ESC> “1”	n	1B	6C n	Set left margin	39
<ESC> “Q”	n	1B	51 n	Set right margin	39
<ESC> “D”	n1 n2	1B	44 n1 n2	Set horizontal tab position	40
<HT>		09		Execute the horizontal tab	40

Control Code Used for Graphics Printing

Control codes			Hexadecimal		Function	Page
			codes
<ESC> “1”			1B 31		Set 7/72-inch line feed	41
<ESC> “A”	n		1B	41 n	Define n/72-inch line feed	41
<ESC> “2”			1B 32		Set n/72-inch line feed	41
<ESC> “J”	n		1B	4A n	One time line feed of n/72-inch	41
<ESC> “z” “0”		1B 7A 30			Set 1/12-inch line feed	41
<ESC> “z” <0>			1B 7A 00
<ESC> “3”	n		1B	33 n	Set n/216-inch line feed simulation	42
<ESC> “y”	n		1B	79 n	Set n/144-inch line feed (Models with 1/44”	42
					-pitch paper feed mechanism only)
<ESC> “K”	n1 <0>		1B	4B n1 00	8 dot single density bit image	42
<ESC> “L”	n1 n2		1B	4C n1 n2	8 dot double density bit image	44
<ESC> “h” “1”		1B 68 31			Select vertical expanded character mode	45
<ESC> “h” <1>			1B 68 01
<ESC> “h” “0”		1B 68 30			Cancel vertical expanded character mode	45
<ESC> “h” <0>			1B 68 00

Control Codes Used for Download Characters

Control codes		Hexadecimal	Function	Page
		codes
<ESC> “&” <0> n1 n2		1B 26 00 n1 n2	Definition of down load characters	46
<ESC> “%” “1”	1B 25 31		Enable download character set	47
<ESC> “%” <1>		1B 25 01
<ESC> “%” “0”	1B 25 30		Disable download character set	47
<ESC> “%” <0>		1B 25 00

– 30 –