Star Micronics SP300 manual Function

7-1. Control Codes Used for Character Setting

FUNCTION

CODE

DEFINITION RANGE

OUTLINE

Select international character set <ESC> “R” n

(1B)H (52)H n

(00)H n (08)H

Select the international character set corresponding to the value set for n.

n =(00)H: U.S.A.	(03)H: England	(06)H: Italy
(01)H: France	(04)H: Denmark	(07)H: Spain
(02)H: Germany	(05)H: Sweden	(08)H: Japan

The default international characters can also be set with DIP switches, however, setting by control code takes priority over setting by DIP switches.

Refer to chapter 11-5 “Code Table”

FUNCTION

CODE

OUTLINE

NOTE

FUNCTION

CODE

OUTLINE

NOTE

Select IBM character set #2

<ESC> “6” (1B)H (36)H

Selects IBM character set #2.

This code is only valid when the character code table set by DIP switches 2-1 and 2-2 is IBM character set #1 or #2.

Select IBM character set #1

<ESC> “7” (1B)H (37)H

Selects IBM character set #1.

This code is only valid when the character code table set by DIP switches 2-1 and 2-2 is IBM character set #1 or #2.

– 32 –