available wireless AP within the network, click the Site Survey button.
-Wireless Channel: Select the channel from the
-Transmission Rate: Select the data transmit rate from the pull- down menu. The default setting is Fully Automatic.
WEP Encryption
This field allows you to configure the settings of data encryption. Please remember that the WEP key must be set before the data encryption is enforced.
-WEP Encryption: This option allows you to select Disable, 64 bits, and 128 bits for the encryption setting.
-WEP Key Format: You can decide the network key to be encoded by ASCII (ASCII characters) or HEX (hexadecimal digitals).
Then, enter the key(s) for the network in the Key box (1~4).
Advanced Setting
This field allows you to configure more settings, including:
-Beacon Interval: Enter the number of beacon interval time in millisecond.
-Preamble: This option allows you to set the length of preamble.
Setting options are: Long - it is set to 144 bits; Short - it is set to 72 bits.
-Authentication Type: You can set the authentication type by
selecting the settings: Open System, Shared Key, and Both.
- 41 -
TIP:
Once you have changed the settings in each option, click Save to store the settings, or Cancel to abandon.
Configuration J Network
TCP/IP
This field contains three options that allow you to configure the TCP/IP setting: IP Address, UPnP, and MAC Rendezvous.
-IP Address: This option allows you to set the IP address manually or automatically. When you choose Manually Assign,
-42 -