2.The main screen will appear as below, and it starts to search the connected print server within the network.
Your print server
Component Features:
Device List: Display the connected print server within the network.
Control Buttons
-Change IP Address: Click this button to bring up the following dialog box, allowing you to change the IP Address.
In this dialog box, you can select either Manually Assign or DHCP Assign Automatically. When completed, click OK.
-Update Firmware: Click this button to update the firmware of the selected print server.
-17 -
-Show Web Setup: Click this button to open your web browser and launch the Configuration Utility. Alternately, you can
-Factory Reset: Click this button to reload the factory settings of the print server.
-Discover Device: Click this button to search the connected print server again.
-About: Click this button to bring up a window containing the basic information of
-Close: Click this button to exit
Information Field: Display the basic information of the selected print server in the Device List.
Status Bar: Display the system status.
- 18 -