TRENDnet TK-400K, TK-200K manual Your installation is now complete

Page 5

8. Turn ON the connected computers one-by-one and wait until each computer's desktop appears.

Your installation is now complete.

Note: Do not press the push button of the KVM switch or perform a "Hot-Key" command while the computers are booting up. Go to Section 3 Operation.

English

Image 5

Contents TK-200K TK-400K Table of Contents System Requirements Before You StartHow to Install Your installation is now complete Operation Hot-Key command = ScrLk + ScrLk + Command keysKVM Cable SpecificationsQ1 Where is the AC adapter? I did not find one in the box TroubleshootingLimited Warranty Page Product Warranty Registration

Related manuals

Manual 11 pages 39.7 Kb