TRENDnet TK-200K, TK-400K manual Operation, Hot-Key command = ScrLk + ScrLk + Command keys

3. Operation

Note: To switch between computers, you can use the front-panel push button or the "Hot-Key" commands.

3.1 Push Button

Press the push button to switch between computers.

Push Button. (TK-200 shown)

3.2 Hot-Key Commands

A keyboard hot-key command consists of three keystrokes:

Hot-Key command = ScrLk + ScrLk + Command key(s)

After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again. You then have another 2 seconds to press a command key. If you do not press a key within 2 seconds, the switch will exit hot-key mode.

Below are the “Hot-Key” commands:

ScrLk + ScrLk + = Next Channel

ScrLk + ScrLk + = Previous Channel

ScrLk + ScrLk + S = Auto Scan

In Hot-Key mode, press the “Up-Arrow” to select the next port, “Down Arrow” to select the previous port, and “S” key to set the KVM switch to Auto-Scan mode.

4

English