Star Micronics TUP492-24 operation manual Displays and Functions, LEDs, Resume Button

Page 15

6. DISPLAYS AND FUNCTIONS

The LEDs and RESUME button are mounted on the NEPCB.

6.1 LEDs

LED

Function

 

 

HU

Lights up when errors occur

PE

(For more details, refer to “6.6 Error Messages”.)

ERR

 

 

 

6.2 RESUME Button

When no paper is inserted, insert more paper, then press this button to automatically feed the specified length of paper (approx. 80 mm when the presenter is installed or approx. 30 mm when it is not). After the paper is cut, the printer will go back on line.

6.3 Power Switch and Button Combinations

The following settings can be made by pressing either the RESUME button or the sensor adjusting but- ton at the same time that the power switch is turned on.

<RESUME button and power switch>

Buzzer

LED

 

Function

One beep

HU lights up

 

 

↓

 

2 sec.

Release the RESUME button to execute a HEX dump.

 

[*1]

 

 

 

Two beeps

PE lights up

 

 

 

 

 

Release the RESUME button to execute a test print. [*2]

[*1] The HEX dump mode remains valid until the power is turned off.

[*2] The printer continues the test print until the power is turned off.

<Sensor adjusting button and power switch>

Buzzer

LED

 

Function

One beep

HU lights up

 

 

↓

 

2 sec.

Release the sensor adjusting button to start sensor

 

adjusting mode. [*3]

 

 

 

 

 

 

 

[*3] Do not continue pressing the sensor adjusting button for more than two seconds.

Note) The Line and Page modes cannot be chosen with the panel buttons; these modes can only be

chosen with commands.

– 12 –

Page 14 Page 16
Image 15
Page 14 Page 16
Contents TUP492-24 Page Contents TUP4 General DescriptConstruction ConfigurationPrinciple of Operation Exterior View Ascii General SpecificationsTF50KS-E TF62KS-E Paper Roll SpecificationsPage Switches and Buttons Printer SettingsSetting the DIP Switches OFFDTR XON/XOFF DIP switch 2 only for the RS-422A DC1, 3 disabled Address #1 USA Setting the EepromIBM Resume Button Power Switch and Button CombinationsDisplays and Functions LEDsNear-End Sensor Sensor Adjusting ModeLED ERR Error MessagesPage Near-End Sensor Position Serial Interface RS-232C or RS-422A InterfaceSD + Parallel Interface Cutter Presenter OCR-B CharactersCharacter Set Characters and SizesPower Requirements Unit power cable 24V GND AMP Standards NoiseReliability During operationDuring storage Allowable Static Electricity Level Vibration TestDrop Test Mcbf Life TestOpen Installing the Paper RollPress Installation procedure InstallationOther precautions Installation precautionsUnit mm External Dimensions Unit mm Installation Hole Dimensions Maintenance Maintenance TimingMaintenance Procedures Presenter Cover Screw Paper sensor Distributed by

TUP492-24 specifications

The Star Micronics TUP492-24 is a versatile and reliable thermal printer designed primarily for point-of-sale (POS) applications in retail and hospitality environments. Known for its compact design and exceptional printing capabilities, the TUP492-24 seamlessly integrates into various business settings, making it a preferred choice for those seeking efficiency in receipt printing.

One of the standout features of the TUP492-24 is its high-speed printing capability. With a printing speed of up to 200mm per second, this printer effectively meets the demands of busy environments, helping to reduce customer wait times and streamline operations. Additionally, the printer supports a paper width of 80mm, ensuring compatibility with a wide range of receipt formats.

The TUP492-24 employs advanced thermal printing technology, eliminating the need for ink or toner and significantly reducing maintenance costs. The printer's thermal head is designed for durability, allowing for a longer lifespan and consistent performance over time. This robustness makes the TUP492-24 a cost-effective solution for businesses, as it minimizes the need for frequent replacements or repairs.

In terms of connectivity, the TUP492-24 provides a variety of options to cater to different POS systems. It features USB, Serial, and Ethernet interfaces, allowing for easy integration into existing setups. This flexibility ensures that businesses can choose the best connection method for their specific needs without compromising performance.

Another notable characteristic of the TUP492-24 is its ability to print on a variety of media types, including labels and tickets, in addition to standard receipts. This versatility allows businesses to expand their offerings without investing in additional printing equipment.

The printer also includes user-friendly features such as an easy paper loading mechanism, reducing downtime during busy operations. Its compact footprint allows it to fit in tight spaces, making it ideal for environments where counter space is limited.

In summary, the Star Micronics TUP492-24 thermal printer is a powerful tool designed for high-performance receipt printing. With its fast printing speeds, durable construction, multiple connectivity options, and versatility in media handling, it stands out as a reliable choice for businesses in need of an efficient and dependable POS printing solution. Whether in retail or hospitality, the TUP492-24 is equipped to enhance operational efficiency and improve customer service.
Top Page Image Contents