Star Micronics XR-1500 Special print mode control’codes, 1Set or cancel pica proportional pitch

Page 38

1Set or cancel pica proportional pitch

IBM 1

<ESC>P<n>

1Bh50hCn>

2780Cn>

The command above sets or cancels pica proportional pitch printing, where <n> is abinaryvalueofeitherOOhorOlh.If<n>issettoOlh,thenpicaproportionalprinting

is enabled, and if cn> is set to OOh.then pica proportional printing is disabled. Any other values of cn> with this command will set pica pitch, and the printer will attempt to print cn>, If Panel Pitch Lock mode has been selected, then this command will be ignored.

Special print mode control’codes

1Select/cancel expanded printing

Both

cESC>W<n>

1Bh57hCfP

2787Cn>

The command above selects or cancels expanded printing, where cn> is a binary or ASCII value from OOhthrough Olh or “0” through “1”. If <n>=OOhor “O”, then expanded printing is deselected (cancelled), and if ol>=Olh or “l”, then expanded printing is selected for all printing subsequent to the receipt of this command.

Select one-line expanded printing

Both

cEsc>

<so>

 

1BhOEh

2714

<so>

Either of the commands above will select one-line expanded print. There are no parameters. Expanded printing will be performed subsequent to the receipt of this command until any of the following commands is received: cDC4>, cLD, cESC>

<LB, <VT>, cFl+, cESC> e or cESC> W.

32

Page 37 Page 39
Image 38
Page 37 Page 39
Contents XR-1000 Above sto~emm~ applies only to printers marketed in the USA Congratulations Organization of this ManualDIP Switches Table of Contents Replacing the Print Head Front Panel Diagnostic Test Modes TroubleshootingMaintenance Adjusting the Printing GAP IBM Character SET #2UNPACKING, Setting UP and Connection ChapterUser’s manual Setting up Print head shield Connection DIP switch cover Loading Paper Cut-sheet paperFanfold paper continuous stationery Page Once the paper has been loaded Controls Controls and IndicatorsIndicators Pitch Setting Pitch Pane/ LockQuiet Mode Font Panel LockPaper parking Paper HandlingForm feed Short tear-off function Micro Feed Buffer CLEAR/RESETTest and Maintenance Settings Setting UP the Memory Switches Iiii Command Menu Menu OptionsPrint Menu Paper MenuForms Menu Courier DRW Factory settingsKNI Offj WFIEmulations Numerical RepresentationCommand Codes and Escape Sequences CBS Example command BothCESC CodesFont style and character set control codes ESCBiIliIIy Select font BothSelect character table Both ValueSelect International Character Set Esc Select primary character set BothSelect secondary character set Both 06h1Select/cancel Undefined control code area Standard Print continuously from the Ail Characters ChartPrint a single character from the Ail Character Chart IBM ES0\ 1Bh5ChSet pica pitch printing Font pitch control codesSet pica pitch printing Standard Esc 1Set elite pitch printing BothSelect/cancel Proportional printing Both Set condensed print mode1Cancel condensed print mode Standard Escsi1Select/cancel expanded printing Special print mode control’codes1Set or cancel pica proportional pitch Select one-line expanded printingCancel one-line expanded print Select Master print modeCancel emphasized print mode Select print modeSelect emphasized Print mode CESCF 1Bh46h 2770Select/cancel Overline Both Cancel double-strike printing Both CEscSelect/cancel Underline Both 1Select double-strike printing BothSelect superscript/subscript Both Cancel superscript/subscript BothLine space control codes Line feed Both1Set line spacing to l/6 inch Standard Set line spacing to l/8 inch BothSet line spacing to 7/72 inch 1Set line spacing to n/216 inch BothExecute ES&A definition Set line spacing to W72 inch1Define line spacing l/72 inch increments One-time line feed in l/216 inch incrementsSet vertical print position in lines Both CEsc Form feed control codesReverse one-time line feed in l/216 inch increments Both Form feedBoth tSet page length in lines Reverse feed to top of formSet page length in inches ESC Cnulb CID1Move to next vertical tab position Both Margins and vertical tab setting control codesSet top-of-form 1Set vertical tab positions Both CEscSet relative vertical tab positions Select vertical form unit VFU channelSet VFU vertical tabs 1Set bottom margin Both Cancel top and bottom margins BothSet top margin Both Set left and right margins BothSet right margin Horizontal print position control codesSet left margin Both Carriage return Both1Set/clear Horizontal tabs Both Set/cancel Automatic line feedMove to next horizontal tab ES6Set horizontal print position Both Restore tabs to default settingsSet relative horizontal tab positions Both ESC CtP 1Bh 66h 30h 102Select Next horizontal print position by dot 1Set iustification Mode BothProduce character space Standard Copy standard ROM font into RAM Character control codesMove print head Esc CNUI2tandard1Define draft download characters Both 1Define draft download characters 27 61 cd 012~ 20 em Cal a2 cdl ... cdlll1st CESC%n 1Bh25hn GraphicsSelect download/standard character set Select &dot normal density Both Redefine bit-image mode Double-density BothSet MSB to Miscellaneous codes1Set MSB to Both 1Select zero style Both 1Cancel MSB control BothCancel last character Standard Backspace BothSet printer on line Both Cancel last line BothSet printer off-line Deselect printer 10 carriage model onlyDeselect printer 15 carriage model only Disable paper-out detection BothEnable paper-out detection Both 1Sound buzzer BothExecute macro instruction Enable/disable Bidirectional printing BothEnable unidirectional printing for one line only Both Enable/disable large character printing Both Enable/disable double-height modeSelect character height, width, line spaclng Both CESC 1Bh 19h Set/cancel Immediate modeASF Automatic Sheet Feeder control Both Ascii command sequences Select fontBold prlnt Both Select/cancelItalic print Print BothSelect color printing with color option only Both Control ASFMemo Chapter OFF Troubleshooting and Maintenance TroubleshootingPower supply PrintingIf the print is faint, or uneven, check the following Check Paper feeding Check Check Adjusting the Printing GAP MaintenanceRibbon Replacement Now the cover turn the You now to Reusing printer Replacing the Print Head Print head bolts Short test mode Front Panel Diagnostic and Test ModesPage Text test mode Hexadecimal dump mode Lprint CHR$IBidirectional test/adjustment mode Repeat the process for all print modes Memo Installing Application Software with Your Printer ChapterCPI ProportionalSetting UP the Printer from the DOS Prompt Graphics Hard CopyProgramming Using Basic Sample programLprint LOGO$ROW=LOGO$ROW+CHR$GD How the program works Lprint E$ Swsi SW SW Patches necessary to use the Basic interpreter Color displayPrint direction Print pins Line spacingSpeed Unidirectional15model Bit image dot-matrixPacr width CopiesOptions Weight 15 modelPower supply 100 Character Sets ’l-igStandard Character SET #I XJh-lx-l 241 401 661 721 Eel I1041 120101I Standard Character SET #2 SET ##2 1108Rml Lliil 1361 m R168i IIBM Character SET #I Additional Character SET 1NTERNATlONAL Character Sets Denmark/NorwayMemo IDI Graphics direction Graphics dumpUnidirectional printing Unpacking Vertical pitch Zero style RAM usage Ribbon installation, 4 RS232 interfaceQuiet mode, 11,13,19

XR-1000, XR-1500 specifications

Star Micronics has established itself as a leading provider of premium printing solutions, an assertion further bolstered by its innovative models, the XR-1000 and XR-1500. These thermal receipt printers are designed to meet the diverse needs of retail, hospitality, and various business environments, combining robust features, state-of-the-art technologies, and user-friendly characteristics.

The Star Micronics XR-1000 is engineered for high-performance printing, boasting a print speed of up to 200 mm per second. It ensures swift transaction processing, which is essential in high-volume retail settings. The XR-1500, an advanced counterpart, raises the bar with a higher print resolution, delivering crisp and clear receipts that enhance customer experience. Both models utilize direct thermal printing technology, eliminating the need for ink or toner and significantly reducing operational costs.

One of the standout features common to both models is their compact design, making them suitable for environments with limited space. Their lightweight structure also allows for easy relocation, which is beneficial for businesses with dynamic layouts. Furthermore, the printers are equipped with easy paper loading mechanisms that maximize efficiency and minimize downtime.

Connectivity options are another highlight of the XR-1000 and XR-1500. Both models support a variety of interfaces, including USB, Bluetooth, and Ethernet, allowing seamless integration with existing systems. This flexibility ensures that businesses can adapt to evolving technological requirements without significant overhauls.

Moreover, the XR-1000 and XR-1500 printers are compatible with various point-of-sale (POS) systems and software applications, providing reliable performance across different platforms. Their resilience is notable as well, featuring durable casing and components designed to withstand the rigors of daily use.

The models also incorporate advanced power-saving features, crucial for businesses looking to reduce energy costs without sacrificing performance. Their intuitive LED indicators provide real-time feedback, allowing users to quickly assess the status of the printer.

In summary, the Star Micronics XR-1000 and XR-1500 deliver a high-quality printing experience, characterized by speed, reliability, and flexibility. With their advanced technologies and thoughtful design, these printers stand out as optimal choices for businesses seeking efficiency and quality in their printing solutions. Whether in a bustling retail environment or a busy restaurant, it is clear that these printers offer the solutions that modern businesses need.
Top Page Image Contents