5.2. Dynamic IP
Use the MAC address when registering for Internet service, and do not change it unless required by your Internet Services Provider (ISP). If your ISP used the MAC address of the Ethernet card as an identifier, connect only the PC with the registered MAC address to the broadband router and click the Clone MAC Address button. This will replace the current MAC address with the already registered Ethernet card MAC address.
Host Name: This is optional.
MAC address: The default value is set to the WAN’s physical interface of the broadband router. Most Dynamic IP connections do not require MAC Address therefore you can leave this section blank if you think this does not apply to your account.
5.3. Static IP
If your ISP Provider has assigned a fixed IP address, you can enter the assigned IP address, Subnet mask, Default Gateway IP address, and Primary DNS of your ISP provider.
When you have a Static IP account, you should have all the information above provided by your ISP. If you don’t, please contact your ISP first.
14