TRENDnet TEW-671BR manual Filter, Adding an address into the list, Remove an address from the list

Page 28

6.5. Filter

This wireless router supports MAC Address Control, which prevents unauthorized clients from accessing your wireless network.

Enable wireless access control: Enable the wireless access control function

Adding an address into the list

Enter the "MAC Address" and "Comment" of the wireless station to be added and then click Add. The wireless station will now be added into the "Current Access Control List" below. If you are having any difficulties filling in the fields, just click "Clear" and both "MAC Address" and "Comment" fields will be cleared.

Remove an address from the list

If you want to remove a MAC address from the "Current Access Control List ", select the MAC address that you want to remove in the list and then click "Delete Selected". If you want to remove all the MAC addresses from the list, just click the Delete All button. Click Reset will clear your current selections.

Click Apply at the bottom of the screen to save the above configurations.

25

Image 28

Contents Page Table of Content Tools Setup Introduction Wireless Performance Considerations Package Contents Product LayoutSystem Requirements InstallationLAN & WAN Login to TEW-671BR System StatusLAN Dhcp ServerDhcp Schedule Event LogMonitor Valid WAN Connection WizardInvalid WAN Connection Wlan Setups Internet Dynamic IP Static IPPPPoE Pptp Wireless 2.4GHz & 5GHz Basic4G Band Mode WDS Advanced Security Enable 802.1x Authentication WEP EncryptionWPA Pre-Shared Key Encryption WPA-Radius Encryption Adding an address into the list FilterRemove an address from the list WPS Wi-Fi Protected Setup Client List Isolation Firewall EnableDemilitarized Zone DMZ Denial of Service DoS Add PC MAC Address MAC FilterRemove PC MAC Address Add PC IP Address IP FilterRemove PC IP Address Add URL Keyword URL FilterRemove URL Keyword Network Address Translation NAT AdvancedPort Mapping Add Port Mapping Port Forwarding Virtual ServerRemove Port Mapping Add Port Forwarding Remove Port ForwardingPort Triggering Special Applications Add Port TriggeringApplication Layer Gateway ALG Remove Port TriggeringUpnp Quality of Service QoS Priority Queue TypeBandwidth Allocation Routing Password Tools SetupRemote management Time DdnsPower Savings DiagnosisBackup FirmwareRestart Appendix a FCC Interference Statement Appendix B IC Interference StatementFederal Communication Commission Interference Statement Industry Canada statementLimited Warranty PWP05202009v2