TRENDnet TEW-671BR manual Security

Page 24

Channel Bandwidth: This is the range of frequencies that will be used. 20/40MHz provides the dual channel bandwidth support and gives you the connection speed of up to 300Mbps. 20MHz provides single channel bandwidth and it provides you the speed of up to 150Mbps.

Preamble Type: The “Long Preamble” can provide better wireless LAN compatibility while the “Short Preamble” can provide better wireless LAN performance.

CTS Protection: It is recommended to enable the protection mechanism. This mechanism can decrease the rate of data collision between 802.11b and 802.11g wireless stations. When the protection mode is enabled, the throughput of the Router will be a little lower due to a lot of frame-network that is transmitted.

TX Power: This can be set to a bare minimum or maximum power.

6.4. Security

This Access Point provides complete wireless LAN security functions, included are WEP, IEEE 802.1x, WPA with pre-shared key and WPA with RADIUS. With these security functions, you can prevent your wireless LAN from illegal access. Please make sure your wireless stations use the same security function, and are setup with the same security key.

ESSID Selection: This broadband router support multiple ESSID, you could select and set up the wanted ESSID.

Broadcast ESSID: If you enabled “Broadcast ESSID”, every wireless station located within the coverage of this access point can discover this access point easily. If you are building a public wireless network, enabling this feature is recommended.

WMM: Wi-Fi Multi-Media if enabled supports QoS for experiencing better audio, video and voice in applications.

Encryption: When you choose to disable encryption, it is very insecure to operate TEW-671BR.

21

Image 24
Contents Page Table of Content Tools Setup Introduction Wireless Performance Considerations Package Contents Product LayoutInstallation System RequirementsLAN & WAN Login to TEW-671BR System StatusLAN Dhcp ServerDhcp Schedule Event LogMonitor Wizard Valid WAN ConnectionInvalid WAN Connection Wlan Setups Internet Dynamic IP Static IPPPPoE Pptp Wireless 2.4GHz & 5GHz Basic4G Band Mode WDS Advanced Security Enable 802.1x Authentication WEP EncryptionWPA Pre-Shared Key Encryption WPA-Radius Encryption Filter Adding an address into the listRemove an address from the list WPS Wi-Fi Protected Setup Client List Isolation Enable FirewallDemilitarized Zone DMZ Denial of Service DoS MAC Filter Add PC MAC AddressRemove PC MAC Address IP Filter Add PC IP AddressRemove PC IP Address URL Filter Add URL KeywordRemove URL Keyword Advanced Network Address Translation NATPort Mapping Port Forwarding Virtual Server Add Port MappingRemove Port Mapping Add Port Forwarding Remove Port ForwardingPort Triggering Special Applications Add Port TriggeringApplication Layer Gateway ALG Remove Port TriggeringUpnp Quality of Service QoS Priority Queue TypeBandwidth Allocation Routing Tools Setup PasswordRemote management Time DdnsPower Savings DiagnosisBackup FirmwareRestart Appendix a FCC Interference Statement Appendix B IC Interference StatementFederal Communication Commission Interference Statement Industry Canada statementLimited Warranty PWP05202009v2