TRENDnet TEW-637AP 3.01 manual Nic, Ntp, Ofdm, Osi, Ospf, Ppp, Pptp, Radius

Page 36

Network Address Translation allows many private IP addresses to connect to the Internet, or another network, through one IP address

NetBEUI

NetBIOS Extended User Interface is a Local Area Network communication protocol. This is an updated version of NetBIOS

NetBIOS

Network Basic Input/Output System

Netmask

Determines what portion of an IP address designates the Network and which part designates the Host

Network Interface Card

A card installed in a computer or built onto the motherboard that allows the computer to connect to a network

Network Layer

The third layer of the OSI model which handles the routing of traffic on a network

Network Time Protocol

Used to synchronize the time of all the computers in a network

NIC

Network Interface Card

NTP

Network Time Protocol

O

OFDM

Orthogonal Frequency-Division Multiplexing is the modulation technique for both 802.11a and 802.wireless g

OSI

Open Systems Interconnection is the reference model for how data should travel between two devices on a network

OSPF

Open Shortest Path First is a routing protocol that is used more than RIP in larger scale networks because only changes to the routing table are sent to all the other APs in the network as opposed to sending the entire routing table at a regular interval, which is how RIP functions

P

Password

A sequence of characters that is used to authenticate requests to resources on a network

Personal Area Network

The interconnection of networking devices within a range of 10 meters

Physical layer

The first layer of the OSI model. Provides the hardware means of transmitting electrical signals on a data carrier

Ping

A utility program that verifies that a given Internet address exists and can receive messages. The utility sends a control packet to the given address and waits for a response.

PoE

Power over Ethernet is the means of transmitting electricity over the unused pairs in a category 5 Ethernet cable

Port

A logical channel endpoint in a network. A computer might have only one physical channel (its Ethernet channel) but can have multiple ports (logical channels) each identified by a number.

PPP

Point-to-Point Protocol is used for two computers to communicate with each over a serial interface, like a phone line

PPPoE

Point-to-Point Protocol over Ethernet is used to connect multiple computers to a remote server over Ethernet

PPTP

Point-to-Point Tunneling Protocol is used for creating VPN tunnels over the Internet between two networks

Preamble

Used to synchronize communication timing between devices on a network

Q

QoS

Quality of Service

R

RADIUS

Page 36

Image 36
Contents Page Federal Communication Commission Interference Statement FCC Radiation Exposure StatementEurope EU Declaration of Conformity Page Contents Package Contents Minimum System RequirementsFeatures IntroductionHardware Overview WPS ButtonRear View Installation Considerations Getting Started Page Page Page Page Page Page Using the Configuration Menu Network LAN Setting NetworkWireless Wireless BasicRepeater Mode Support Wireless Mode WDS ModeNetwork Name Ssid Multiple Ssid #Operating Mode Channel BandwidthGuard Interval Reserve Direction Grant RDGWireless Advanced Beacon IntervalFragment Threshold RTS ThresholdIAPPInter-Access Point Protocol ProtectionFrame aggregation Msdu aggregationMAC Filter Security WPA/WPA2 Mode Group Key Update IntervalWPA/WPA2-Personal and Enterprise Cipher TypeWPA/WPA2-Personal WPA/WPA2-EnterpriseWPA/WPA2 mixed environment WPS mode WPSStation List Administrator System ManagementUpload Firmware Settings Management StatusBootp GlossaryAscii CATDhcp DNSEAP FTPGUI HttpHttps IcmpIPX ISPLAN LEDNIC NTPOfdm OSIRIP RSASIP SmtpTCP/IP TftpUDP URLWisp WlanWPA Specifications Limited Warranty PWP05202009v2