Battery installation & charging
After battery installation, place the handset in the charger and allow it to charge for 16 hours before use. You can keep the battery charged by returning the handset to the charger after each use. When the battery is fully depleted, a recharge takes about 12 hours.The average talk time on a fully charged battery is about eight hours depending on environmental condi- tions, standby time is approximately four days.
Press in and downward on | Plug the battery |
the tab to open the battery | pack connector |
compartment cover. | into handset. |
Place the battery
pack and wires in Slide battery compartment the compartment. cover up until it clicks closed.
Plug power adapter into the jack on the underside of charger as shown, then plug into electrical outlet.
Place handset in base or charger to charge for 16 hours before first use.
LOW BATTERY
Low battery indicator Return handset to base or charger to recharge when this symbol flashes. (Handset will beep when battery is low.)
Caution: Use only supplied rechargeable battery or replacement battery pack (Part Number
NOTE: Use only the power cord and adapter supplied with this product. If you need a replace- ment, call
not controlled by a wall switch.
