AT&T E597-1 user manual Registration, To add a new handset

Registration

Before using a new E597-1 handset, you must register it with the E5917/ E5926/E5927B/E5937B/E5938B/E5939B/E5947B base.

The handset provided with your E5926/E5917 is automatically registered as Handset 1. Additional handsets will be assigned numbers in the order they are registered (Handset 2, Handset 3, or Handset 4).You can register a maximum of 4 handsets.

The E5927B/E5938B has 2 handsets automatically registered as Handset

1 and 2. You can register two additional handsets, which will be assigned number 3 and 4.

The E5937B/E5939B has 3 handsets automatically registered as Handset 1, 2 and 3. You can register one additional handset, which will be assigned number 4.

The E5947B has 4 handsets automatically registered as Handset 1, 2, 3 and 4. It is a full system. If you are replacing a handset or wish to change the assigned handset number of your registered handsets, you must first de-register all the handsets, then re-register all handsets (see page 7).

NOT REGISTERED

PRESS HNDST LOC 4 SEC ON BASE

HS X REGISTERED

Before using a new E597-1 handset, you must register it with the base.

To add a new handset:

•When first purchased, all optional acces- sory handsets show NOT REGISTERED on the screen.

•Make sure your handset battery is prop- erly installed and charged.

•Put the handset in a cradle which is plugged into AC power. After a few sec- onds PRESS HNDST LOC 4 SEC ON BASE will be shown on the screen.