TRENDnet TEW691GR manual Technical Specifications, Hardware

Page 46

TRENDnet User’s Guide

Technical Specifications

Hardware

 

Wired: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX),

Standards

IEEE 802.3ab (1000Base-T)

 

Wireless: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n

 

 

LAN

4 x 10/100/1000Mbps Auto-MDIX port

 

 

WAN

1 x 10/100/1000Mbps Auto-MDIX port

 

 

WPS Button

Wi-Fi Protected Setup (WPS) connects with other WPS

compliant devices

 

 

 

WDS

Enable/disable Wireless Distribution System support

 

 

LED Indicator

Power, WLAN, LAN, WPS

 

 

Power Adapter

12V DC, 1A external power adapter

 

 

Power Consumption

450mA (max.)

 

 

Dimension (L x W x H)

148x 180 x 32mm (6.2 x 7.1 x 1.0in.)

 

 

Weight

289g (10 oz)

 

 

Temperature

Operation: 0°~ 40°C (32°F~ 104°F)

Storage: -20°~ 60°C (-4°F~140 °F)

 

 

 

Humidity

Max. 90% (non-condensing)

 

 

Certifications

CE, FCC

 

 

Wireless

 

 

 

Frequency

2.412 ~ 2.472GHz

 

 

Antenna

3 x 4dBi fixed dipole antennas

 

 

 

OFDM: BPSK, QPSK, 16-QAM, 64-QAM

Modulation

DBPSK, DQPSK, CCK

 

 

Data Rate

802.11b: up to 11Mbps

802.11g: up to 54Mbps

 

 

 

TEW-691GR

 

802.11n: up to 450Mbps

 

 

Security

64/128-bit WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS

Multiple SSID

 

 

 

Access Control

MAC Address Filter (Up to 24 entries)

 

 

 

802.11b: 11dBm (typical)

Output Power

802.11g: 15dBm (typical)

 

802.11n: 15dBm (typical)

 

 

Receiving Sensitivity

802.11b: -84dBm (typical)

802.11g: -72dBm (typical)

 

 

802.11n: -69dBm (typical)

 

 

Channels

2.4GHz : 1~11 (FCC), 1~13 (ETSI)

 

 

*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions.

© Copyright 2012 TRENDnet. All Rights Reserved.

46

Image 46
Contents Page Table of contents Table of contents Features Package ContentsProduct Overview Product Hardware Features Rear ViewFront View Side ViewApplication Diagram Wireless Performance ConsiderationsHow to setup your router Basic Router SetupHow to set up a home network Where to find more helpRouter Installation Hardware Installation Setup WizardClick the Wizard button on the left side TEW-691GR Connect additional wired devices to your network Wireless Networking and Security Wireless Encryption TypesSecure your wireless network Use Tkip Mode Choose HEX or AsciiWirelessly WEP Choose Open System or Shared Key WEP Key FormatConnect wireless devices to your router Connect wireless devices using WPSPIN Personal Identification Number Basic wireless settingsPBC Software/Virtual Push Button Radio On/OffBroadcast Network Name Ssid Steps to improve wireless connectivity Wireless Distribution System WDS Advanced wireless settingsWireless Advanced Port Range and Service Block Access Control FiltersAccess control basics Advanced Access ControlIP Address Filters URL FiltersAccess your router management Advanced Router SetupUsing the Configuration Menu Password is admin Click LoginAdministrator Management Change your router login passwordChange your router device name Change your router URL Manually configure your Internet connectionNetwork WAN Setting Clone a MAC addressNetwork LAN Setting Set up the Dhcp server on your routerChange your router IP address Set up Dhcp reservation Configuring IPv6 on your router Network IPv6 SettingTEW-691GR Main Time Set your router date and timeSet schedules Advanced ScheduleNetwork QoS QoS Quality of ServiceOpen a device on your network to the Internet Advanced DMZVirtual Server Advanced Virtual ServerExample To forward TCP port 80 to your IP camera Special ApplicationsAdvanced Special Application Gaming Advanced GamingInbound Filter Enable dynamic routing on your routerAdd static routes to your router Advanced Inbound FilterEnable Application Level Gateway ALG Advanced ALGIdentify your network on the Internet Enable/disable UPnP on your routerClick on Administrator and click on Management Advanced Advanced NetworkReset your router to factory defaults Router Maintenance & MonitoringAllow remote access to your router management Click on Administrator and click on Settings ManagementReboot your router Router Default SettingsBackup and restore your router configuration settings To restore your router configurationRemotely check router status Upgrade your router firmwareClick on Administrator and click on Upload Firmware Please note the followingView your router log Select Enable System LogRouter Status Check the router system informationDynamic Dhcp List Internet ConfigurationsWireless LAN LAN InformationAdministrator IPv6 Status Wireless Station ListWireless Station List IPv6 StatusManagement Page Structure Technical Specifications HardwareTroubleshooting WindowsHow to find your IP address? AppendixHow to find your MAC address? Apple Menu System Preferences NetworkRoHS Federal Communication Commission Interference StatementFCC Radiation Exposure Statement Europe EU Declaration of ConformityLimited Warranty Limited Warranty