TRENDnet TEW691GR manual Router Installation

Page 9

TRENDnet User’s Guide

Router Installation

Before you Install

Many Internet Service Providers (ISPs) allow your router to connect to the Internet without verifying the information fields listed below. Skip this section for now and if your router cannot connect to the Internet using the standard installation process, come back to this page and contact your ISP to verify required ISP specification fields listed below.

1.Obtain IP Address Automatically (DHCP) Host Name (Optional)

Clone Mac Address (Optional)

2.Fixed IP address

WAN IP Address: _____. _____._____._____

(e.g. 215.24.24.129)

WAN Subnet Mask: _____. _____._____._____

WAN Gateway IP Address: _____. _____._____._____

DNS Server Address 1: _____. _____._____._____

DNS Server Address 2: _____. _____._____._____

3.PPPoE to obtain IP automatically User Name: _________

Password: ________________

Verify Password: ________________

4.PPPoE with a fixed IP address User Name: _________

Password: ________________

Verify Password: ________________

IP Address: ____. _____._____._____ (e.g. 215.24.24.129)

TEW-691GR

5.PPTP or Russian PPTP Type (Dynamic IP or Static IP)

My IP Address: _____. _____._____._____

(e.g. 215.24.24.129)

Subnet Mask:_____. _____._____._____

Gateway:_____. _____._____._____

Server IP: _____. _____._____._____

PPTP Account: ________________

PPTP Password: ________________

Retype Password: ________________

6.L2TP or Russia L2TP

Type (Dynamic IP or Static IP)

My IP Address: _____. _____._____._____

(e.g. 215.24.24.129)

Subnet Mask:_____. _____._____._____

Gateway:_____. _____._____._____

Server IP: _____. _____._____._____

L2TP Account: ________________

L2TP Password: ________________

Retype Password: ________________

7. Russia PPPoE

Type (Dynamic IP or Static IP)

User Name: _________

Password: ________________

Verify Password: ________________

IP Address: ____. _____._____._____ (e.g. 215.24.24.129)

© Copyright 2012 TRENDnet. All Rights Reserved.

9

Image 9
Contents Page Table of contents Table of contents Package Contents FeaturesProduct Overview Rear View Product Hardware FeaturesSide View Front ViewWireless Performance Considerations Application DiagramHow to set up a home network Basic Router SetupHow to setup your router Where to find more helpRouter Installation Setup Wizard Hardware InstallationClick the Wizard button on the left side TEW-691GR Connect additional wired devices to your network Wireless Encryption Types Wireless Networking and SecuritySecure your wireless network Wirelessly Mode Choose HEX or AsciiUse Tkip WEP Choose Open System or Shared Key WEP Key FormatConnect wireless devices using WPS Connect wireless devices to your routerPBC Software/Virtual Push Button Basic wireless settingsPIN Personal Identification Number Radio On/OffBroadcast Network Name Ssid Steps to improve wireless connectivity Advanced wireless settings Wireless Distribution System WDSWireless Advanced Access control basics Access Control FiltersPort Range and Service Block Advanced Access ControlURL Filters IP Address FiltersUsing the Configuration Menu Advanced Router SetupAccess your router management Password is admin Click LoginChange your router login password Administrator ManagementChange your router device name Network WAN Setting Manually configure your Internet connectionChange your router URL Clone a MAC addressSet up the Dhcp server on your router Network LAN SettingChange your router IP address Set up Dhcp reservation Network IPv6 Setting Configuring IPv6 on your routerTEW-691GR Set schedules Set your router date and timeMain Time Advanced ScheduleOpen a device on your network to the Internet QoS Quality of ServiceNetwork QoS Advanced DMZAdvanced Virtual Server Virtual ServerSpecial Applications Example To forward TCP port 80 to your IP cameraAdvanced Special Application Advanced Gaming GamingAdd static routes to your router Enable dynamic routing on your routerInbound Filter Advanced Inbound FilterAdvanced ALG Enable Application Level Gateway ALGClick on Administrator and click on Management Enable/disable UPnP on your routerIdentify your network on the Internet Advanced Advanced NetworkAllow remote access to your router management Router Maintenance & MonitoringReset your router to factory defaults Click on Administrator and click on Settings ManagementBackup and restore your router configuration settings Router Default SettingsReboot your router To restore your router configurationClick on Administrator and click on Upload Firmware Upgrade your router firmwareRemotely check router status Please note the followingRouter Status Select Enable System LogView your router log Check the router system informationWireless LAN Internet ConfigurationsDynamic Dhcp List LAN InformationWireless Station List Wireless Station ListAdministrator IPv6 Status IPv6 StatusManagement Page Structure Hardware Technical SpecificationsWindows TroubleshootingAppendix How to find your IP address?Apple Menu System Preferences Network How to find your MAC address?FCC Radiation Exposure Statement Federal Communication Commission Interference StatementRoHS Europe EU Declaration of ConformityLimited Warranty Limited Warranty