TRENDnet 54Mpbs 802.11g Wireless Access Point + Bridge Configure the computer’s TCP/IP Settings

Page 5

3. Configure the computer’s TCP/IP Settings

The Access Point has a default IP address 192.168.1.250, therefore to be able to access and configure the Access Point, the computer's TCP/IP settings need to be changed.

Windows 95/98/98SE/ME

1.Find the Start button located on Desktop.

2.Click Start; click Settings and then click on Control Panel.

3.Double-Click the Network Icon and the Network Properties box will appear.

4.Under the Configuration tab, locate and select TCP/IP with the corresponding network card. Then click on the Properties button and the TCP/IP Properties window will appear.

3

English

Page 4 Page 6
Image 5
Page 4 Page 6
Contents TEW-410APBplus Table of Contents Verify Equipment Prepare for InstallationVerify Package Contents Verify Hardware Installation Install HardwareWindows 95/98/98SE/ME Configure the computer’s TCP/IP SettingsEnglish Windows 2000/XP English Mac OS From a Wired PC Configure the Access PointEnglish From a Wireless PC English English Troubleshooting TRENDnet
Top Page Image Contents