TRENDnet TEW-410APB, Wireless 802.11g AP user manual Upgrade Firmware, To upgrade the AP’s firmware

Page 21

4.9. Upgrade Firmware

To perform the firmware upgrade action, please go to the System section.

Firmware Upgrade: Click the Firmware Upgrade button to load new firmware onto the AP. If the AP is not experiencing difficulties, then there is no need to download a more recent firmware version, unless that version has a new feature that you want to use.

Note: When you upgrade the AP’s firmware, you may lose its configuration settings, so make sure you write down the AP’s settings before you upgrade its firmware.

To upgrade the AP’s firmware:

1.Download the firmware upgrade file from the internet.

2.Extract the firmware upgrade file.

3.Click the Firmware Upgrade button.

4.On the Firmware Upgrade screen, click the Browse button to find the firmware upgrade file.

User’s Guide

20

Page 20 Page 22
Image 21
Page 20 Page 22
Contents TEW-410APB Copyright Statement Troubleshooting Introduction Safety Notification LED Status Turn on Power Supply Make Correct Network Settings of Your Computer Primary SetupWireless Settings Algorithms WPA-Preshared keyWPA Shared KeyServer Port Default port being used is Please input the Authentication port of your Radius serverRadius server will accept the authentication if both Please choose your algorithms method. You can selectSystem Operating Mode User’s Guide Status Traffic Log Access Control Authentication Type Advanced WirelessUser’s Guide Identification Contact SNMPv2cUnit Name DescriptionTo upgrade the AP’s firmware Upgrade FirmwareUser’s Guide Can’t connect to other computers on my LAN LAN Connection Problems I can’t access my APTechnical Support
Top Page Image Contents