TRENDnet Wireless 802.11g AP Primary Setup, Make Correct Network Settings of Your Computer

Page 8

4.1. Primary Setup

MAKE CORRECT NETWORK SETTINGS OF YOUR COMPUTER

To change the configuration, use Internet Explorer (IE) or Netscape Communicator to connect the WEB management 192.168.1.250.

Primary Setup

This screen contains all of the AP©s basic setup functions.

.

Most users will be able to configure the AP and get it working properly using the settings on this screen.

LAN IP Address and Subnet Mask: This is the AP©s IP Address and Subnet Mask as seen on the internal LAN. The default value is 192.168.1.250 for IP Address and 255.255.255.0 for Subnet Mask.

User’s Guide

7

Image 8

Contents TEW-410APB Copyright Statement Troubleshooting Introduction Safety Notification LED Status Turn on Power Supply Primary Setup Make Correct Network Settings of Your ComputerWireless Settings WPA-Preshared key AlgorithmsWPA Shared KeyPlease input the Authentication port of your Radius server Server Port Default port being used isRadius server will accept the authentication if both Please choose your algorithms method. You can selectSystem Operating Mode User’s Guide Status Traffic Log Access Control Advanced Wireless Authentication TypeUser’s Guide SNMPv2c Identification ContactUnit Name DescriptionUpgrade Firmware To upgrade the AP’s firmwareUser’s Guide LAN Connection Problems I can’t access my AP Can’t connect to other computers on my LANTechnical Support