TRENDnet TEW-413APBO manual Upgrade Firmware, To upgrade the AP’s firmware

Page 21

4.9. Upgrade Firmware

To perform the firmware upgrade action, please go to the System section.

Firmware Upgrade: Click the Firmware Upgrade button to load new firmware onto the AP. If the AP is not experiencing difficulties, then there is no need to download a more recent firmware version, unless that version has a new feature that you want to use.

Note: When you upgrade the AP’s firmware, you may lose its configuration settings, so make sure you write down the AP’s settings before you upgrade its firmware.

To upgrade the AP’s firmware:

1.Download the firmware upgrade file from the internet.

2.Extract the firmware upgrade file.

3.Click the Firmware Upgrade button.

4.On the Firmware Upgrade screen, click the Browse button to find the firmware upgrade file.

User’s Guide

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents User’s Guide Copyright Statement Troubleshooting Introduction For TEW-412APBOFor TEW-413APBO Safety Notification AP Default Settings Turn on Power Supply Web Management SettingsMake Correct Network Settings of Your Computer Primary SetupWireless Settings Algorithms WPA-Preshared keyWPA Shared KeyServer Port Default port being used is Radius server will accept the authentication if bothPlease choose your algorithms method. You can select System Operating Mode User’s Guide Status Traffic Log Access Control Authentication Type Advanced WirelessUser’s Guide Identification Contact SNMPv2cDescription description PhysicalTo upgrade the AP’s firmware Upgrade FirmwareUser’s Guide Can’t connect to other computers on my LAN LAN Connection Problems I can’t access my APUser’s Guide Limited Warranty
Top Page Image Contents