TRENDnet TEW-413APBO manual User’s Guide

Page 24

Wireless Troubleshooting

I can’t access the Wireless AP from a wireless network card

Cause:

Out of range.

IP Address is not set correctly.

Resolution:

Make sure that the Mode, SSID, Channel and encryption settings are set the same on each wireless adapter.

Make sure that your computer is within range and free from any strong electrical devices that may cause interference.

Check your IP Address to make sure that it is compatible with the Wireless AP.

User’s Guide

24

Image 24

Contents User’s Guide Copyright Statement Troubleshooting Introduction For TEW-412APBOFor TEW-413APBO Safety Notification AP Default Settings Web Management Settings Turn on Power SupplyPrimary Setup Make Correct Network Settings of Your ComputerWireless Settings WPA-Preshared key AlgorithmsWPA Shared KeyServer Port Default port being used is Radius server will accept the authentication if bothPlease choose your algorithms method. You can select System Operating Mode User’s Guide Status Traffic Log Access Control Advanced Wireless Authentication TypeUser’s Guide SNMPv2c Identification ContactDescription description PhysicalUpgrade Firmware To upgrade the AP’s firmwareUser’s Guide LAN Connection Problems I can’t access my AP Can’t connect to other computers on my LANUser’s Guide Limited Warranty