English - 30
➢ To remove after images on the screen, use either All White, Inverse or Signal Pattern function.
Although both of the three functions remove after images on the screen, Signal Pattern is more
effective.
➢ The after image removal function has to be executed for a long time (approximately 1 hour) to
effectively remove after images on the screen. If after image is not improved after the execution of the
function, repeat the function again.
➢ Press any button on the remote control to cancel this feature.
Setting the Screen Burn Protection Timer
You can set the timer for Screen Burn Protection (hours,
minutes). If you start the operation to erase any residual
image, the operation will be performed for the set period of
time and then automatically finish.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ENTER button again to select Screen Burn
Protection.
4 Press the ▲ or ▼ button to select Timer, then press the
ENTER button.
5 Press the ENTER button again.
6 Press the ▲ or ▼ button to select On, then press the ENTER
button.
7 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
Available options: Timer, Mode, Period, Time
Mode: All White, Signal Pattern, Inverse
Period: Hour(1~24)
Time: Min.(1~30)
8 Press the EXIT button to exit.
Move Enter Return
Timer : On
Mode : All White
Period : 1 Hour
Time : 30 min.
Timer
Move Enter Return
Screen Burn Protection
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
Home Theatre PC : Off
More
Setup
Move Enter Return
Pixel Shift
All White
Signal Pattern
Inverse
Timer
Side Gray : Dark
Screen Burn Protection
BN68-01364B-00Eng.indd 30 2007-10-30 ¿ÀÀü 11:01:36