English - 29
Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped
with screen burn prevention technology. This technology
enables you to set picture movement up/down (Vertical Line)
and side to side (Horizontal Dot). The Time setting allows
you to program the time between movement of the picture in
minutes.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ENTER button again to select Screen Burn
Protection.
4 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
Available options: Pixel Shift, All White, Signal Pattern,
Inverse, Timer, Side Gray
5 When you are satisfied with your setting, press the
ENTER button.
6 Press the EXIT button to exit.
Pixel Shift: Using this function, you can minutely move pixels
on the PDP in horizontal or vertical direction to minimize after
image on the screen.
− Set Pixel Shift to On by pressing the ▲ or ▼ button, then
press the ENTER button.
− Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
Available options: Horizontal Dot, Vertical Line, Time
➢ Optimum condition for pixel shift;
PC AV/S-Video/
Component/HDMI
Horizontal Dot 1 2
Vertical Line 1 2
Time (minute) 2 min 2 min
➢ The Pixel Shift value may differ depending on the monitor size (inches) and mode.
All White: This function helps remove after images on the screen by changing the color of pixels to
white. Use this function when there are remaining after images or symbols on the screen especially
when you displayed a still image on the screen for a long time.
Signal Pattern: This function helps remove after images on the screen by moving all the pixels on
the PDP according to a pattern. Use this function when there are remaining after images or symbols
on the screen especially when you displayed a still image on the screen for a long time.
Inverse: This function removes after images on the screen when the PDP Display is remained on for
proloned periods by converting RGB input signal into GBR. Compared to All White and Signal Pattern
function, this function can reduce burn in when you watch PDP Display. Using the inverse function
when you watch PDP Display can cause the color reversal on the screen. (ex. The colors in red line
can be shown as the colors in green line on the screen.)
Side Gray: When you watch PDP Display with the screen ratio of 4:3, the screen is prevented from
any damage by adjusting the white balance on both extreme left and right sides.
Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
Continued...
Move Enter Return
Pixel Shift
All White
Signal Pattern
Inverse
Timer
Side Gray : Dark
Screen Burn Protection
Move Enter Return
Pixel Shift : On
Horizontal Dot : 2
Vertical Line : 2
Time : 2 min
Pixel Shift
Move Enter Return
Screen Burn Protection
Language : English
Time
Game Mode : Off
Blue Screen : Off
Melody : Off
PC
Home Theatre PC : Off
More
Setup
BN68-01364B-00Eng.indd 29 2007-10-30 ¿ÀÀü 11:01:35