TRENDnet TEW711BR manual Installation

Page 9

TEW-711BR

TRENDnet User’s Guide

Installation

1.Verify that you have an Internet connection when connecting your computer directly to the xDSL/Cable modem.

2.Turn off your xDSL/Cable modem.

3.Disconnect the Ethernet cable (also called network cable) from your xDSL/Cable modem and your computer.

4.Connect one end of a network cable to one of your router LAN ports (1-4). Connect the other end of the network cable to the computer Ethernet port (also called network port).

5.Connect one end of a network cable to your router WAN port. Connect the other end of the network cable to your xDSL/Cable modem network port.

Basic Router Setup

6.Connect the included power adapter to your router Power Port and then to an available power outlet. Push the On/Off Power Switch on your router to the “On” (inner) position.

7.Turn on your xDSL/Cable modem.

8.Verify that the following front panel LED indicators on your router: Power (Solid Green), Status (Blinking Green), LAN 1, 2, 3, or 4 (Solid/Blinking Green), WAN (Solid/Blinking Green), and WLAN (Blinking Green)

© Copyright 2011 TRENDnet. All Rights Reserved.

7

Image 9

Contents TEW-711BR TRENDnet User’s Guide Contents Package Contents FeaturesProduct Overview Rear Panel View Front Panel View Side Panel View Application DiagramCreating a Home Network Basic Router SetupFixed IP address Before you InstallInstallation Setup Wizard TEW-711BR TEW-711BR How to connect additional wired devices to your network How to access your router management Advanced Router SetupHow to manually configure your Internet connection Main WANHow to clone a MAC address Main Time How to set your router date and timeMain Password How to change your router login passwordMain LAN & Dhcp Server How to change your router IP address192.168.10.30 How to set up the Dhcp server on your routerHow to set up Dhcp reservation How to enable/disable UPnP on your router How to allow/deny VPN connections through your routerManagement Remote Management How to allow/deny multicast streaming How to identify your network on the InternetMain Dynamic DNS How to allow remote access to your router management How to expose a device on your network to the InternetAccess DMZ Routing Static How to add static routes to your routerRouting Dynamic How to enable dynamic routing on your routerHow to choose the type of security for your wireless network Wireless NetworkingWireless Security How to secure your wireless networkTkip PBC Hardware Push Button How to connect wireless devices using WPS