TRENDnet TEW711BR manual How to connect wireless devices using WPS, PBC Hardware Push Button

Page 29

TEW-711BR

 

TRENDnet User’s Guide

Wireless Networking

How to connect wireless devices using WPS

WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless devices support WPS, you can use this feature to easily add wireless devices to your network.

Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled.

There are two methods the WPS feature can easily connect your wireless devices to your network.

∙PBC (Push Button Configuration) Method

oHardware Push Button - located physically on your router

oWPS Software/Virtual Push Button - located in router management page

∙PIN (Personal Identification Number) Method - located in router management page

Note: Refer to your wireless device documentation for details on the operation of WPS.

PBC (Hardware Push Button)

To add a wireless device to your network, simply push the WPS button on the wireless device you are connecting, then push and hold the WPS button located on your router for 3 seconds and release it. A blue LED on your router WPS button will flash indicating that the WPS setup process has been activated on your router. (See “Side Panel View” on page 4)

For connecting additional WPS supported devices, repeat this process for each additional device.

© Copyright 2011 TRENDnet. All Rights Reserved.

27

Page 28 Page 29
Image 29
Page 28 Page 29
Contents TEW-711BR TRENDnet User’s Guide Contents Product Overview Package ContentsFeatures Rear Panel View Front Panel View Side Panel View Application DiagramCreating a Home Network Basic Router SetupFixed IP address Before you InstallInstallation Setup Wizard TEW-711BR TEW-711BR How to connect additional wired devices to your network How to access your router management Advanced Router SetupHow to manually configure your Internet connection Main WANHow to clone a MAC address Main Time How to set your router date and timeMain Password How to change your router login passwordMain LAN & Dhcp Server How to change your router IP address192.168.10.30 How to set up the Dhcp server on your routerHow to set up Dhcp reservation Management Remote Management How to enable/disable UPnP on your routerHow to allow/deny VPN connections through your router Main Dynamic DNS How to allow/deny multicast streamingHow to identify your network on the Internet Access DMZ How to allow remote access to your router managementHow to expose a device on your network to the Internet Routing Static How to add static routes to your routerRouting Dynamic How to enable dynamic routing on your routerHow to choose the type of security for your wireless network Wireless NetworkingWireless Security How to secure your wireless networkTkip PBC Hardware Push Button How to connect wireless devices using WPS
Top Page Image Contents