TRENDnet TPL-110AP manual Other Features

Page 10

4.Select Obtain an IP Address Automatically and Obtain a DNS server automatically.

5.Click OK to close the TCP/IP properties panel.

6.Click OK to close the Network panel. The changes will take a few minutes. Open a new web browser and type in the new IP address of TPL-110AP to ensure the changes worked.

Other Features

Wireless Tab

-Change the value for the SSID ( Note: If you change the value here, you will also need to change the value on each PC.)

-Change the Country where you are

-Change the Band

-Change the Channel

-Change the transmission Mode

-Change the Transmission Mb rates

-Change the Multicast rates

-Enable XPress Technology

-Enable Afterburner Technology

-Change WDS Operation Mode (Note: It depend on you network environment)

-Enable MAC Restrict Mode (Note: Type the MAC address of devices you want to restrict here)

9

Image 10
Contents Page Introduction Important Safety Information What This Package Contains? Getting start with your Powerline DeviceNecessary Equipment? PC or Laptop Setup Guide Equipment that can be used with the TPL-110AP?TPL-110AP Setup Guide Page Setting up the IP address on the TPL-110AP Page Other Features Page Appendix a Features TCP, UDP, ICMP, IgmpAppendix B Limited Warranty Appendix C FCC Statement Limited Warranty