TRENDnet manual Setting up the IP address on the TPL-110AP

Page 8

3. The basic information screen should now appear in the browser window.

4.The default HomePlug password is HomePlug. If your existing HomePlug password is different, change this password accordingly.

Setting up the IP address on the TPL-110AP

1.Click on the LAN Tab.

2.The default IP address of TPL-110AP is 10.0.0.1. You can change this IP address to matches your network configuration (Example: 192.168.1.10)

3.You can change the Subnet mask and Gateway values as well.

At this point, you will need to change the PCs IP address back to it's original settings. Follow

7

Image 8
Contents Page Introduction Important Safety Information Necessary Equipment? Getting start with your Powerline DeviceWhat This Package Contains? PC or Laptop Setup Guide Equipment that can be used with the TPL-110AP?TPL-110AP Setup Guide Page Setting up the IP address on the TPL-110AP Page Other Features Page Appendix a Features TCP, UDP, ICMP, IgmpAppendix B Limited Warranty Appendix C FCC Statement Limited Warranty